tag:blogger.com,1999:blog-5376057412116187041.post4616414358990042814..comments2024-02-14T03:57:08.734-08:00Comments on The Valley Local: Friday Fun - Starting Resin CastingChris Adamshttp://www.blogger.com/profile/18052818057825432279noreply@blogger.comBlogger2125tag:blogger.com,1999:blog-5376057412116187041.post-19846735158906324882018-03-31T08:39:00.219-07:002018-03-31T08:39:00.219-07:00Hi Chris. Enjoying your posts about casting. Whe...Hi Chris. Enjoying your posts about casting. When using plate glass I have put a very light coating of Pam cooking spray on the side that will lay on the resin. I have found the cured casting will lift off easily from the glass leaving a nice flat back on the casting. Just spray it on the glass then smear it around with a Kleenex to cover the surface. It doesn’t seem to affect the surface of the rain in any way.Don Janeshttps://www.blogger.com/profile/02035486632905010167noreply@blogger.comtag:blogger.com,1999:blog-5376057412116187041.post-79500552137459592842018-03-31T03:47:13.551-07:002018-03-31T03:47:13.551-07:00It is better to use a piece of overhead acetate or...It is better to use a piece of overhead acetate or similar between the resin and plate glass backing, as occasionally urethane resin will stick to glass - don't ask me how I know,<br /><br />TerryAnonymousnoreply@blogger.com